Product Categories

Social Media

Home > News > Content
The Hydraulic Shearing Machine Blade Must Be Kept Clean
- Jun 14, 2017 -

  The Hydraulic Shearing Machine blade must be kept clean

  Hydraulic Shearing Machine and other hydraulic press hydraulic oil selection is mainly the choice of viscosity, it depends on the structure of the hydraulic pump, operating temperature, pressure and operating characteristics.

  Hydraulic Shearing Machine and other hydraulic presses should be used correctly, depending on the type of Hydraulic Shearing Machine and the hardness of the indirect material to select the size and material of the Hydraulic Shearing Machine.

  Must be in accordance with the provisions of the equipment to select the appropriate hydraulic oil, the use of water, emulsions, dust and other impurities to prevent the use of steel structure.

  In the side of the cylinder under the action of the thrust, no paint part of the anti-rust grease. Motor bearing lubrication oil to regularly replace the filling, and often check the electrical part of the work is safe and reliable.

  Hydraulic Shearing Machine blade must always be kept clean, regularly check the Hydraulic Shearing Machine blade blade V-belt, handle, knob, button is damaged, the Hydraulic Shearing Machine blade wear serious should be replaced promptly.

  And reported spare parts to regularly check the repair switch, insurance, handle, to ensure its reliable work. General 9CrSI material with a relatively wide 6CrW2Si material is basically suitable for cutting any material material.

  Used Hydraulic Shearing Machine can be tilted around the fixed pin to complete the shear movement, no rail system. When the cut is finished, the tool holder is quickly and automatically returned under the action of the return tank.

  Hydraulic cutting plate machine with a rapid adjustment of the blade gap mechanism, the scale value on the dial shows the Hydraulic Shearing Machine blade only good maintenance in order to make its long life, allowing users to use more liking.